» Send To A Friend

Siemens Fan Oven Elements, Siemens Grill Elements, Siemens Cooker Elements

Siemens Oven and Grill Elements (Total Products 12, Showing: 9 -> 12)

Genuine spare part Oven Element 1700 watts Part No 494643 Fan Oven Element to fit Siemens Ovens Height 165mm, Width 230mm, Bracket 45mm, Tags 18mm, Siemens Cooker models to fit HB90324GB/01, HB90325GB/01, HB90325GB/02, HB90354GB/01, HB90355GB/01, HB90355GB/02, ...

Genuine Spare Part Siemens Plug-in Grill Element Left Hand Plug in 2000 watts Length 310 mm Width 460 mm Bracket 70 mm Tags 20 mm Genuine Grill Element for Siemens Cookers Part No, 202870 Siemens Cooker models to fit HB90420GB/01, HB90420GB/02, HB90440GB/02,

Genuine Spare Part Siemens Grill Element Genuine Twin Grill Element for Siemens Cookers 2690 Watts Height 360mm Width 390mm Bracket 100mm Tags 80/25mm Part No, 297516 Siemens Cooker models to fit HB27024GB/01 HB27024GB/06 HB27044GB/0...

Genuine Spare Part Siemens Grill Element Genuine Twin Grill Element for Siemens Cookers 2300 Watts Part No, 358481 Siemens Cooker models to fit HB90324GB/01 HB90325GB/01 HB90325GB/02 HB90354GB/01 HB90355GB/01...

Siemens Oven Elements and Siemens Grill Elements

Siemens Fan Ovens - Built-In or Free Standing Siemens Cookers

The heating element which produces the heat to maintain a cooking temperature in an oven is installed in the rear of a oven box in a circular form around the oven fan blade which distributes the hot air round the oven to produce an even cooking temperature over the whole of the oven with cooking times being reduced in a fan oven

All Siemens oven fan motors should turn all the while the oven is turned on, failure of the oven fan to turn at full speed will result in poor cooking results and can cause the element to fail

Power to the oven elements is controlled either mechanically by turning a temperture dial or thermostat contol or electronically by a timer control panel.When an oven fails to come on you should always first check the auto clock to ensure this is set correctly, needs to be on a manual setting for the oven to come on

Oven fan elements have a fairly high rate of failure and will often cause the electrical supply to trip or to blow a fuse, failure is also sometimes accompanied by a covering of white powder substance over the oven caused by a split in the metal covering of the element

Most elements are fitted from inside the oven compartment and can reached by removing the covering plate from back of the compartment, however some elements are retained to the rear of the oven by threaded studs from the element bracket and retained by nuts which means the element is only removable by access to the rear of the oven box

Ensure that when replacing an Siemens Oven Element that the fixings for the element are secure and tight, failure to secure the element can result in this touching the fan blade which make the oven very noisy but also can damage the element which can shorten its life, be also very careful if spraying the oven with an oven cleaner to make sure that this does not come into contact with the element, this will again damage the element surface which will reduce its life

Siemens Ovens - Built-In or Free Standing with conventional heating elements and Fan heating elements

These ovens use a base element which is fitted under bottom of the main oven box together with the outer ring of the the grill element to provide heat for conventional heating ovens,

Siemens oven base elements can only be accessed from the rear of the oven but the grill may in some cases be able to be changed from inside the the oven box by removal of screws from the fixing bracket, be aware that when extracting the element it will have connecting wires attached, other may have stud fixing which again will have to removed from the rear of the cooker.

Changing a Siemens element should only be undertaken by a qualified or competent person with the electric supply disconnected