» Send To A Friend

Rangemaster Fan Oven Elements, Rangemaster Grill Elements, Rangemaster Cooker Elements

Rangemaster Oven and Grill Elements (Total Products 6, Showing: 1 -> 6)

View Normal

Genuine Spare part Fan Oven Element 2200 watt Part Ref 9303370300 Fan Oven Element to fit Rangemaster Cookers and Ovens length 210mm, width 190mm, bracket 70mm, tags 25mm, Rangemaster Cooker models to fit Flavel RANGEMASTER D90 Single Oven Classic 60S Double Oven Classic 90D CLASSIC 60S BLACKBRASS CLASSIC 60...

Genuine spare part Fan Oven Element 1500 watt Part Ref 9303371400 Fan Oven Element to fit Rangemaster Cookers and Ovens 2 turn, length:200mm, width:80mm, bracket:100mm, tags:60mm, Please note that the measurements of this element may be slightly different from the original element. Rangemaster Cookers to fit Flavel RANGEMASTER 90d

Genuine spare part Fan Oven Element 2500 watt length 260mm, width 185mm, bracket 70mm, tags 25mm, Part Ref A094693 Rangemaster Leisure Flavel fan oven element Rangemaster Cooker models to fit CHEFCENTRE 110, CLASSIC 110DF, 5711002001, CLASSIC 90, CLASSIC 90, 5679010010, Classic 90,6468001007, 6469001119,&...

Genuine spare part Grill Element 2350 watts Grill Element for Rangemaster Leisure Cookers Part No, P026810 Length 420 mm Rangemaster Cooker models to fit 6099, CLASSIC 90, CLASSIC 90 DF, Cookmaster 110, RANGEMASTER 110DS, RANGEMASTER 90,

Geniune spare part Grill Element 1150 watts Length 320 mm Width 190 mm Bracket 70 mm Tags 50 mm Part Ref A025628 OR FVLP038435 Rangemaster grill element Rangemaster Cookers models to fit Flavel RANGEMASTER 110 , Leisure Clasic 90, Leisure CLASSIC 110, Leisure CLASSIC 55 Dual Fuel , Leisure PROFESSIONAL 110 , L...

Grill Element 1150 watts Length 320 mm Width 190 mm Bracket 70 mm Tags 50 mm Part Ref A025628 Rangemaster grill element Rangemaster Cooker models to fit Flavel RANGEMASTER 110 , Leisure Clasic 90, Leisure CLASSIC 110, Leisure CLASSIC 55 Dual Fuel , Leisure PROFESSIONAL 110 , Leisure PROFESSIONAL 90 , Leisure RANG...

View Normal

Rangemaster Oven Elements and Rangemaster Cooker Grill Elements

Rangemaster Fan Ovens - Built-In or Free Standing Rangemaster Cookers

The heating element which produces the heat to maintain a cooking temperature in an oven is installed in the rear of a oven box in a circular form around the oven fan blade which distributes the hot air round the oven to produce an even cooking temperature over the whole of the oven with cooking times being reduced in a fan oven

All Rangemaster oven fan motors should turn all the while the oven is turned on, failure of the oven fan to turn at full speed will result in poor cooking results and can cause the element to fail

Power to the oven elements is controlled either mechanically by turning a temperture dial or thermostat contol or electronically by a timer control panel.When an oven fails to come on you should always first check the auto clock to ensure this is set correctly, needs to be on a manual setting for the oven to come on

Oven fan elements have a fairly high rate of failure and will often cause the electrical supply to trip or to blow a fuse, failure is also sometimes accompanied by a covering of white powder substance over the oven caused by a split in the metal covering of the element

Most elements are fitted from inside the oven compartment and can reached by removing the covering plate from back of the compartment, however some elements are retained to the rear of the oven by threaded studs from the element bracket and retained by nuts which means the element is only removable by access to the rear of the oven box

Ensure that when replacing an Rangemaster Oven Element that the fixings for the element are secure and tight, failure to secure the element can result in this touching the fan blade which make the oven very noisy but also can damage the element which can shorten its life, be also very careful if spraying the oven with an oven cleaner to make sure that this does not come into contact with the element, this will again damage the element surface which will reduce its life

Rangemaster Ovens - Built-In or Free Standing with conventional heating elements and Fan heating elements

These ovens use a base element which is fitted under bottom of the main oven box together with the outer ring of the the grill element to provide heat for conventional heating ovens,

Rangemaster oven base elements can only be accessed from the rear of the oven but the grill may in some cases be able to be changed from inside the the oven box by removal of screws from the fixing bracket, be aware that when extracting the element it will have connecting wires attached, other may have stud fixing which again will have to removed from the rear of the cooker.

Changing a Rangemaster element should only be undertaken by a qualified or competent person with the electric supply disconnected